B.K.Exports (Subsidiary Of Nanak Singh & Sons)

• Precise pressure distribution
• Superior for rigorous misalignment conditions
• Superior for extreme applications
• Capable of supporting heavy loads
• Frictionless rotation

• Pumps
• Mechanical fans & blowers
• Mining and construction equipment
• Gearboxes
• Wind turbines
• Continuous casting machines
• Material handling
• Pulp & paper processing equipment
• Marine propulsion & offshore drilling

• Available in plain or K (TAPER BOR) series

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.
Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.
IMB -Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.
IMB - TYPES - N. NU, NF, NJ, NUP, DU, DOUBLE ROLLER TAPER BEARING
N and NU  series of bearings-This are single row, cylindrical roller bearings, this are designed for axial load.
NF, NJ and NUP series of bearings – This series of bearings are designed to withstand thrust load apart from radial load.
ADVANTAGES –This bearings have greater resistance to fatigue and shock then ball bearings
IMB - SPHERICAL BEARINGS – This type of bearings allow rotation around a central point in two orthogonal directions. This particular bearings are also known as ball joint bearings, can be in plan bearings or roller bearing. This bearings are in two types non sealed / open bearing and other is sealed.
FUNCTION OF SPHERICAL BEARINGS- This type of bearing permits rotation with low friction and manages misalignment between the shaft and housing. This bearings are used in extreme tough running conditions. This particular bearing is used in mining, construction equipment, textile and more.
IMB - KINGPIN BEARINGS –This are components in vehicle steering system, they support the vertical load and allows the steering knuckles or axles to rotate. They basically maintain the alignment and stability of the front wheels and smooth steering. The bearings are made for high quality material, which make them durable. The kingpin bearing design makes them corrosion resistance and give long life. This bearings are used in vehicles like Trucks, Autos, Tractors and Earthmover.
IMB - DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

The ball bearings are made of two rings or races, with steel balls in between, it helps reduces friction and allows moving parts of the machine to roll over each other. It basically reduce the friction, which increase the life of the machine or machine parts. Ball bearings are used in day to day products, like house hold electrical appliances, water pumps automotive and many other equipment’s.  Ball bearings are made up of variety of materials like Bearing steel, carbon steel, chrome steel, aluminium, tungsten carbide, platinum and many other materials.

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.
Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.
DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.
WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.
Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.
Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.
TYPES - N. NU, NF, NJ, NUP
N and NU  series of bearings-This are single row, cylindrical roller bearings, this are designed for axial load.
NF, NJ and NUP series of bearings – This series of bearings are designed to withstand thrust load apart from radial load.
ADVANTAGES –This bearings have greater resistance to fatigue and shock then ball bearings
SPHERICAL BEARINGS – This type of bearings allow rotation around a central point in two orthogonal directions. This particular bearings are also known as ball joint bearings, can be in plan bearings or roller bearing. This bearings are in two types non sealed / open bearing and other is sealed.
FUNCTION OF SPHERICAL BEARINGS- This type of bearing permits rotation with low friction and manages misalignment between the shaft and housing. This bearings are used in extreme tough running conditions. This particular bearing is used in mining, construction equipment, textile and more.
KINGPIN BEARINGS –This are components in vehicle steering system, they support the vertical load and allows the steering knuckles or axles to rotate. They basically maintain the alignment and stability of the front wheels and smooth steering. The bearings are made for high quality material, which make them durable. The kingpin bearing design makes them corrosion resistance and give long life. This bearings are used in vehicles like Trucks, Autos, Tractors and Earthmover.
DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.
Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.
DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.
WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.
Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.
Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.
TYPES - N. NU, NF, NJ, NUP
N and NU  series of bearings-This are single row, cylindrical roller bearings, this are designed for axial load.
NF, NJ and NUP series of bearings – This series of bearings are designed to withstand thrust load apart from radial load.
ADVANTAGES –This bearings have greater resistance to fatigue and shock then ball bearings
SPHERICAL BEARINGS – This type of bearings allow rotation around a central point in two orthogonal directions. This particular bearings are also known as ball joint bearings, can be in plan bearings or roller bearing. This bearings are in two types non sealed / open bearing and other is sealed.
FUNCTION OF SPHERICAL BEARINGS- This type of bearing permits rotation with low friction and manages misalignment between the shaft and housing. This bearings are used in extreme tough running conditions. This particular bearing is used in mining, construction equipment, textile and more.

The wheel hub unit commercial vehicles- The unit is made up of two modified taper bearings, with a retaining clip to make it easier to mount the wheel hub.
Hub insert unit – This are standard taper roller bearing comes in pair of inner and outer bearings with two rotary shaft seals.
Repair insert unit – (RIU).This are sealed bearing units are pre- assembled and lubricated .This particular unit increases stiffness and service life. It also reduces running noise.
Two types of hub unit – One that supports the vehicle’s weight and another that transmits the driving force from the engine to the wheel.

The ball bearings are made of two rings or races, with steel balls in between, it helps reduces friction and allows moving parts of the machine to roll over each other. It basically reduce the friction, which increase the life of the machine or machine parts. Ball bearings are used in day to day products, like house hold electrical appliances, water pumps automotive and many other equipment’s.

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.
Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.
DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.
WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.
Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.
Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.
TYPES - N. NU, NF, NJ, NUP
N and NU  series of bearings-This are single row, cylindrical roller bearings, this are designed for axial load.
NF, NJ and NUP series of bearings – This series of bearings are designed to withstand thrust load apart from radial load.
ADVANTAGES –This bearings have greater resistance to fatigue and shock then ball bearings
SPHERICAL BEARINGS – This type of bearings allow rotation around a central point in two orthogonal directions. This particular bearings are also known as ball joint bearings, can be in plan bearings or roller bearing. This bearings are in two types non sealed / open bearing and other is sealed.
FUNCTION OF SPHERICAL BEARINGS- This type of bearing permits rotation with low friction and manages misalignment between the shaft and housing. This bearings are used in extreme tough running conditions. This particular bearing is used in mining, construction equipment, textile and more.
KINGPIN BEARINGS –This are components in vehicle steering system, they support the vertical load and allows the steering knuckles or axles to rotate. They basically maintain the alignment and stability of the front wheels and smooth steering. The bearings are made for high quality material, which make them durable. The kingpin bearing design makes them corrosion resistance and give long life. This bearings are used in vehicles like Trucks, Autos, Tractors and Earthmover.
DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.
Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.
DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.
WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.
Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.
Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.
TYPES - N. NU, NF, NJ, NUP
N and NU  series of bearings-This are single row, cylindrical roller bearings, this are designed for axial load.
NF, NJ and NUP series of bearings – This series of bearings are designed to withstand thrust load apart from radial load.
ADVANTAGES –This bearings have greater resistance to fatigue and shock then ball bearings
SPHERICAL BEARINGS – This type of bearings allow rotation around a central point in two orthogonal directions. This particular bearings are also known as ball joint bearings, can be in plan bearings or roller bearing. This bearings are in two types non sealed / open bearing and other is sealed.
FUNCTION OF SPHERICAL BEARINGS- This type of bearing permits rotation with low friction and manages misalignment between the shaft and housing. This bearings are used in extreme tough running conditions. This particular bearing is used in mining, construction equipment, textile and more.
KINGPIN BEARINGS –This are components in vehicle steering system, they support the vertical load and allows the steering knuckles or axles to rotate. They basically maintain the alignment and stability of the front wheels and smooth steering. The bearings are made for high quality material, which make them durable. The kingpin bearing design makes them corrosion resistance and give long life. This bearings are used in vehicles like Trucks, Autos, Tractors and Earthmover.
DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.
Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.
IMB -Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.
IMB - TYPES - N. NU, NF, NJ, NUP, DU, DOUBLE ROLLER TAPER BEARING
N and NU  series of bearings-This are single row, cylindrical roller bearings, this are designed for axial load.
NF, NJ and NUP series of bearings – This series of bearings are designed to withstand thrust load apart from radial load.
ADVANTAGES –This bearings have greater resistance to fatigue and shock then ball bearings
IMB - SPHERICAL BEARINGS – This type of bearings allow rotation around a central point in two orthogonal directions. This particular bearings are also known as ball joint bearings, can be in plan bearings or roller bearing. This bearings are in two types non sealed / open bearing and other is sealed.
FUNCTION OF SPHERICAL BEARINGS- This type of bearing permits rotation with low friction and manages misalignment between the shaft and housing. This bearings are used in extreme tough running conditions. This particular bearing is used in mining, construction equipment, textile and more.
IMB - KINGPIN BEARINGS –This are components in vehicle steering system, they support the vertical load and allows the steering knuckles or axles to rotate. They basically maintain the alignment and stability of the front wheels and smooth steering. The bearings are made for high quality material, which make them durable. The kingpin bearing design makes them corrosion resistance and give long life. This bearings are used in vehicles like Trucks, Autos, Tractors and Earthmover.
IMB - DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

IMB, SPHERICAL BEARING FOR AUTOMOTIVE AND INDUSTRIAL APPLICATION. BEARING NO - 22206 CCW33C3, DIMENSION- 30X62X20

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.
Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.
DIFFERENT TYPES OF BEARINGS –IMB Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Accommodate misalignment, High load carrying capacity, Relubrication features, Low friction and long service life, Increased wear resistance

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.
Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.
IMB -Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.
IMB - TYPES - N. NU, NF, NJ, NUP
N and NU  series of bearings-This are single row, cylindrical roller bearings, this are designed for axial load.
NF, NJ and NUP series of bearings – This series of bearings are designed to withstand thrust load apart from radial load.
ADVANTAGES –This bearings have greater resistance to fatigue and shock then ball bearings
IMB - SPHERICAL BEARINGS – This type of bearings allow rotation around a central point in two orthogonal directions. This particular bearings are also known as ball joint bearings, can be in plan bearings or roller bearing. This bearings are in two types non sealed / open bearing and other is sealed.
FUNCTION OF SPHERICAL BEARINGS- This type of bearing permits rotation with low friction and manages misalignment between the shaft and housing. This bearings are used in extreme tough running conditions. This particular bearing is used in mining, construction equipment, textile and more.
IMB - KINGPIN BEARINGS –This are components in vehicle steering system, they support the vertical load and allows the steering knuckles or axles to rotate. They basically maintain the alignment and stability of the front wheels and smooth steering. The bearings are made for high quality material, which make them durable. The kingpin bearing design makes them corrosion resistance and give long life. This bearings are used in vehicles like Trucks, Autos, Tractors and Earthmover.

IMB, SPHERICAL BEARING FOR AUTOMOTIVE AND INDUSTRIAL APPLICATION.BEARING NO- 22207 CCW33C3, DIMENSION- 35X72X26

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.
Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.
DIFFERENT TYPES OF BEARINGS –IMB Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Accommodate misalignment, High load carrying capacity, Relubrication features, Low friction and long service life, Increased wear resistance

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.
DIFFERENT TYPES OF BEARINGS –IMB-  Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.
WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.
Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.
IMB Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.
Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

IMB - DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

CENTRE JOINT BEARING- IT ALSO KNOW AS CENTER BEARING, IT STABILIZES A VEHICLE SHALF AND ALLOWS IT TO ROTATE SMOOTHLY, IT IS LOCATED UNDERTHE VEHICLE, AROUND THE DRIVE SHALF, WHICH IS LONG ROTATING TUPE IN MIDDLE. THE CENTER BEARING RUBBER IS crucial component, IT PRIMARY FUNCTION IS ABSORBING VIBRATION AND PROVIDING SUPPORT DURING ROUGH ROAD CONDITION. IT ALSO HOLD THE CENTER BEARING AND ALLOWS SHALF TO MOVE SMOOTHLY.

CENTRE JOINT BEARING- IT ALSO KNOW AS CENTER BEARING, IT STABILIZES A VEHICLE SHALF AND ALLOWS IT TO ROTATE SMOOTHLY, IT IS LOCATED UNDERTHE VEHICLE, AROUND THE DRIVE SHALF, WHICH IS LONG ROTATING TUPE IN MIDDLE. THE CENTER BEARING RUBBER IS crucial component, IT PRIMARY FUNCTION IS ABSORBING VIBRATION AND PROVIDING SUPPORT DURING ROUGH ROAD CONDITION. IT ALSO HOLD THE CENTER BEARING AND ALLOWS SHALF TO MOVE SMOOTHLY.

IMB, SPHERICAL BEARING FOR AUTOMOTIVE AND INDUSTRIAL APPLICATION. BEARING NO- 22312 CCW33C3, DIMENSION- 60X130X46OEM NO- 4260666 TATA HITACHI

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.
Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.
DIFFERENT TYPES OF BEARINGS –IMB Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

Spherical roller bearings can accommodate heavy loads in both directions. They are self-aligning and accommodate misalignment and shaft deflections, with virtually no increase in friction or temperature. The design includes features to facilitate relubrication. The bearings can be used in a modular system, including housings, sleeves and nuts. Accommodate misalignment, High load carrying capacity, Relubrication features, Low friction and long service life, Increased wear resistance

Bearing Number -GE 16ES 2RS
DIMENSION -16.00 X 30.00 X 14.00

Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.

Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers. 

PLAIN SPHERICAL BEARING -Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

BEARING  NUMBER - GE 30ES 2RS
DIMENSION -30.00 X 47.00 X 22.00

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

PLAIN SPHERICAL BEARING -Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

 Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

BEARING NUMBER -GE 17ES 2RS
DIMENSION
17.00 X 30.00 X 14.00
WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.

Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

BEARING NUMBER -GE 50ES  2RS 

DIMENSION -50.00 X 75.00 X  35.00  

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

PLAIN SPHERICAL BEARING -Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

TAPER ROLLER BEARINGS-Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

PLAIN SPHERICAL BEARING -Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

 Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

 WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

PLAIN SPHERICAL BEARING -Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

TAPER ROLLER BEARINGS-Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

BEARING NUMBER -GE 25ES 2RS 

DIMENSION -25.00 X 42.00 X 20.00

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.

PLAIN SPHERICAL BEARING -Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers. 

PLAIN SPHERICAL BEARING -Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

 TAPER ROLLER BEARINGS-Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

BEARING NUMBER -GE 20ES 2RS

DIMENSION - 20.00 X 35.00 X 16.00

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

 PLAIN SPHERICAL BEARING -Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.

Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

WHAT ARE BEARINGS - Bearings are "parts that assist objects' rotation bearings assist the shaft that rotates inside the machinery smoothly.

Bearings are used in automobiles, airplanes, electric generators and so on. Also used in household appliances.The function of the Bearings is to rotating shafts of the wheels, gears, turbines, rotors, etc. in those machines, allowing them to rotate more smoothly.. The function of the bearings is to reduce friction, make rotation smoother and to protect the part that supports the rotation, and maintain the correct position for the rotating shaft.

DIFFERENT TYPES OF BEARINGS – Ball bearings, Taper, Cylindrical, Spherical, Kingpin, Needle and DAC Bearings.

WHAT ARE TAPER BEARINGS AND ITS FUNCTIONS – Tapered roller bearings supports axial forces, as well as radial forces. The taper bearings consist of Cone, Cup, Cage and Rollers.

TAPER ROLLER BEARINGS-Tapered roller bearings are made up of cone assembly and a cup. The cone assembly consists of the inner ring, the rollers, and a cage that retains and evenly spaces the rollers. The cup is simply the outer ring. Internal clearance is established during mounting by the axial position of the cone relative to the cup, although preloaded installations without clearance are common.

Cylindrical Roller Bearings – As name suggest the rollers are in cylindrical in shape. This bearings are design for heavy machinery and equipment. This bearings can support heavy radial load. The linear contact area with outer rings, helps distributing load on broader area or surface.

Hub units – Also known as wheel bearing hubs, are critical part of the vehicle suspension system that allow the wheel to rotate smoothly and also support the vehicle’s weight. Available in as insert repair unit and repair unit. Hub unit contain two taper roller bearings, are pre-adjusted, greased and sealed at the factory in order to simplify installation. Truck Hub Units are double-row tapered roller bearings with separate cones held together by a retention ring and assembled in a one-piece outer ring.

DAC BEARINGS- DAC bearing are Double Row Angular Contact Ball bearings, these are used in passenger cars, DAC bearing are used in automotive axles to guide rotation and load bearing parts. Normally they are available with oil seal, grease and available in ABC.

PLAIN SPHERICAL BEARING -Plain spherical bearings has inner ring with a convex sphere on the outside and outer ring with a concave sphere on the inside. These bearing are designed to rotate in any direction and are used in construction equipment, car suspensions and engines. Two types of plain spherical bearing- Radial and Angular contact. Radial bearings are best in carrying load in radial direction and contact bearings for carrying in the axial or thrust direction. These bearings are low maintenance, quiet, dirt resistance and reduce damage.